CUMI CWS 190 E Circular Saw

SKU
CUMI CWS 190 E Circular Saw
In stock
₹4,024.00
Overview

CUMI Cricular Saw to cut various types of Woods. CUMI CWS 190 E Circular Saw offers 46mm and 62mm cutting depth. 4500 rpm speed.

6 Months Warranty, Nationwide Free Delivery!

CUMI CWS 190 E Circulal Saw

  • Operating Voltage: 230V 50 Hz
  • Power Input: 1200 Watts
  • Speed (No Load): 5000 rpm
  • Diameter of Wheels: 190 mm
  • Max.Cutting Depth 45 degree: 46 mm
  • Max.Cutting Depth 90 degree: 62 mm
  • Bore Diameter: 25.4 mm
  • Weight: 7 Kg

Application Details

  • Cutting various types of wood.

Standard Accessories

  • Guide Piece
  • Spanner
  • Allen Key

Suitable Accessories

  • Saw Blade

Operating Instructions

Wood Work Station for Circular Saw

Preparing a wooden work stand because the saw blade appears through the lumber's botton plane, place the lumber on a work stand when cutting, when a sqaure plank is utilized as a workstand select level ground to stabilize it. It is very dangerous if the position of the workstand is shaky, the portion of lumber left on the workstand after cutting must be helf tight. For lumber tightly held by a vice, the cutting is safe.

Cutting Procedure

Circular Saw Cutting Procedure

  • Place the saw body on the lumber and align the marking off line with the blade at the guide piece.
  • Turn "ON" the switch button on the leftside before the saw blade touches the lumber.
  • The switch is turned "ON" when the trigger is squeezed and turned "OFF" when the trigger is released.

Installation Procedure

Mounting the saw blade

Caution be sure the power is OFF

  • Install the saw blade in the reverse order of removal.
  • The saw blade should be installed so that the arrow in the saw blade is aligned with the arrow in the saw cover.

Dismounting the saw blade

Caution be sure the power is OFF

  • Se the cutting depth to maximum and place the saw in a rigid position.
  • Depressing the lock lever, turn the bolt up with the spanner.
  • When the saw shaft is fixed, turn the spanner counter clockwise to remove bolt and washer.
  • Hold tight the safety cover knob. Retract the safety cover into the saw cover and take out the saw blade.

Replacing a carbon brush

  • After using the circular saw for a period of time the carbon brushes should be checked. Take out the screw cover and brush. Check the condition of wear. When the carbon brush is worn to 4mm, it should be replaced by a new one.
  • Note: activate the circular saw for several minutes after repalcement of the carbon brush.

Maintenance and Inspection Tips:

Inspecting the saw blades:

  • Use of a dull blade will cause motor malfunctioning the blade should be checked regularly. If the blade is found to be excessively worn, replace with a new one immediately.

Inspecting the mounting screws:

  • Inspecting all mounting screws regularly to be sure that they all are properly tighened. Should any of screw be loose, retighten them at once. Failure to do so could cause a serious accident.

Maintenance of the motor:

  • The motor unit winding is the "heart" of the tool, check it carefully to ensure the winding does not become damaged or wet with water or oil.
  • Maintenance and inspection of the safety cover.
  • Carefully maintain the safety cover so that ir remains capable of smoothly functioning. Completely remove sawdust deposited around the rotry portion of the safety cover and apply spindle oil to its sliding section to attain better functioning.

CUMI Power Tools

CUMI POWER TOOLS is manufactured by Carborundum Universal Limited, a market leader in abrasives for more than ve decades. CUMI‘s foray into power tools is a reiteration of its commitment to provide customers with TOTAL SOLUTIONS. A combination of the right power tool, right spares, right accessories and prompt service. A combination, which is designed to empower the customer.

CUMI Circular Saw CWS 190 E

Write Your Own Review
You're reviewing:CUMI CWS 190 E Circular Saw