Impact Drill 13 mm (Fwd/Rev)

SKU
Impact Drill 13 mm (Fwd/Rev)
Out of stock
₹2,065.00
Overview

Impact Power Drill for various drilling applications like Drilling Concrete, Drilling on Steel, Drilling on Wood. 

IMPACT DRILL CID 013 VR

Product Specifications

Model Code CID 013 VR
Description CUMI Impact Drill 13mm
Operating Voltage 230 Volts, 50 Hz
Power 650 W
Speed (No Load) 0-2800 rpm
Weight 1.3 kg
Type of Carbons Auto- stop type
Chuck Specifications 1/2"
Steel Capacity 10 mm
Concrete Capacity 13 mm
Wood Capacity 15 mm

Standard Accessories

  • Wrench
  • Side Handle
  • Chuck Key

Application Details

  • Drilling on Concrete
  • Drilling on Steel
  • Drilling on Wood

Usage Instructions

Attaching the Addition Handle

For safety reasons,always use the additional handle supplied

Open the clamping ring by turning the additional handle anticlockwise. Push the additional handle onto the collar of the machine. Insert the depth stop. Securely tighten the additional handle at the angle required for the application.

Adjusting the Depth Stop

Loosen the additional handle. Set depth stop to the desired drilling depth and retighten additional handle.

Switching On and Off

To start the machine, press the trigger switch. Press in the trigger switch to change the speed. For continuous operation the trigger switch can be locked using the lock button. To stop the machine, press the trigger switch again.

In continuous operation, the machine continues running if it is forced out of your hands. Therefore, always hold the machine with both hands using the handles provided, stand in a safe position and concentrate.

Switching Between Normal / Impact Drilling

Select the desired operating mode by pushing the sliding switch.

Drilling Drilling
Impact DrillingImpact Drilling

Work with high speed settings when impact drilling.

Impact drilling and normal drilling only in a clockwise direction.

Selecting the Direction of Rotation

Do not activate the direction switch unless the motor has completely stopped.

Select direction of rotation:
R = Clockwise
L = Anticlockwise

Tool Change With Chuck

Clamping tools:

Insert the tool and clamp evenly in all 3 holes using the chuck key.

Impact Drill Inserting the Drill Bit

Removing tools:

Open the geared chuck using the chuck key and remove the tool.

Drill Bit loosening

Inspection and Maintenance Tips

  • Check the drill bit and replace with a new bit whenever cutting edge is worn or damaged.
  • Continuous use will endanger the user and reduce usable life of the tool.
  • Check and replace carbon brushes when they are worn-out. Auto Stop carbon Brushes fitted on the machine will stop the machine when it is worn out.
  • Inspect the tool regularly for loose screws and replace/tighten them periodically.
  • Always be sure that the machine is switched OFF and unplugged when changing a drill bit or for maintenance Purpose.
  • To maintain product safety and reliability, repairs, maintenance or adjustment should be carried out by CUMI Authorised Service Center only.
Write Your Own Review
You're reviewing:Impact Drill 13 mm (Fwd/Rev)